HSM100-EU 868 Z-Wave Multi-Sensor

- 868.42 mhz Euro Z-Wave frequency

- Advanced Mesh Network Protocol

- Includes 300 series Z-Wave chip

- 300 ft Range

- 40,000 bits/sec

- Adjustable WakeUp Notification

- Up to 4 Associated Z-Wave Nodes

- Only 1 Left

HSM100-EU™ a new Euro Z-Wave^® device featuring three-sensors-in-one! HSM100-EU is primarily intended as a motion sensor and is supported as a motion sensor by all Z-Wave certified systems.  However, HSM100-EU can also function as a temperature sensor and light sensor when used with any HomeSeer system!  Use it to control Z-Wave devices directly or trigger HomeSeer automation events for whole house control of Z-Wave and non Z-Wave automation products.

The sensitivity of the HSM100-EU motion sensor is fully adjustable, allowing pet owners to tweak the unit for best performance without false positives. The unit has a range of 30 feet and the sensor angle of view is 90° (horizontal). For best performance, mount the unit flush against a wall at a height of 6-8 feet. It is not necessary to point the unit downward. An exposed side-mounted button allows for easy unit testing and setup and the default setup cycle (10 min's) provides HomeSeer users and installers plenty of time to configure the unit.

 HSM100-EU is battery powered and needs no wires to operate. HSM100-EU can be wall mounted or simply placed on any flat surface. Battery lifetime typically exceeds one year but depends on the operating modes programmed.