Your shopping cart is currently empty. Please continue shopping - as there is nothing to check out
Leviton ODS0D-IDW Dual-Relay Decora Wall Switch Passive Infrared (PIR) Occupancy Sensor - White
Price: $86.26
|
- 180° field-of-view provides approximately 2100 square feet of coverage, suitable for a variety of commercial areas.
- Segmented Fresnel lens provides optimum sensitivity and perf o r mance. Designed with an extensive “small motion” area where even slight body movements will be detected. - Horizontal field of view may be adjusted between 180° and 32° arc by using integral blinders located on either side of the lens. - Optional manual adjustment for delayed-OFF time settings of 30 seconds (for walking test), 5 minutes, 10 minutes and 20 minutes. Allows customized adjustments to maximize energy savings. - Adjustable Ambient Light Override ranges from approximately 2 foot-candles (2 lux) to 500+ foot-candles (500+ lux). - Self-Adjusting Ambient Light Override compensates for changes in lighting requirements after override level has been set. - Manual -ON / Automatic-OFF mode for installations where manual ON switching is required but automatic OFF switching is still desired for energy savings. - LED indicator light flashes when sensor detects motion to verify detection is active. - Unit beeps 3 times after delayed-OFF time expires, then waits 10 seconds before turning lights OFF. - One unit can be used for either 120V or 277V lighting. Compatible with both electronic and magnetic ballasts. - Primary relay switches at the zero crossing point of the AC power curve to ensure longer contact life and compatibility with electronic ballasts. - Unit fits in standard single-gang wallbox and replaces two single-pole wall switches; ground connection required. Gangable with other devices. - C UL / US Certified, complies with California Title 24 Energy Code and F CC Regulations. - Limited Five-Year Warranty |
TheODS0D-ID provides automatic switching of two separate lighting loads from a single unit. It is compatible with incandescent, fluorescent and low-voltage lighting. The unit features dual manualoverride switches that can be used to toggle the ON/OFF status of each lighting load while an area is occupied. The ODS0D-ID can be installed in place of two single-pole wall switches and fits in a standard single-gang wall box. The unit requires a ground connection for proper operation. The ODS0D-ID uses passive infrared (PIR) detection technology to monitor a room for occupancy through a segmented Fresnel lens. This specialized lens divides the field of view into sensor zones. When a person passes into or out of a sensor zone, the sensor detects motion and switches two separate lighting loads ON. The lights will remain ON as long as there is an occupant moving through the sensor zones. A delayed-OFF time adjustment prevents the lights from switching OFF when the space is occupied. In order to keep the lights ON, a person must pass through a sensor zone at least once during the selected delayed-OFF time interval. A self-adjusting delayed-OFF time feature compensates for real-time occupancy patterns to prevent unnecessary ON/OFF switching. An LED indicator blinks each time the unit detects activity in the sensor zones. When the space being monitored by the sensor is unoccupied for the length of the delayed-OFF time interval, the unit will beep 3 times. Ten seconds after the last warning beep, the unit will switch the lights OFF. |
